Okuma | IMTS 2024 Digital Booth Experience

QUICK FACTS

Making its global debut at IMTS 2024, the MA-4000H is a high-speed, thermally stable horizontal machining center that offers quick acceleration, short tool changes, and high power to improve productivity.

SHOW MACHINE SPECS

The Okuma MA-4000H machine tool at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Machining Dia./Height	Ø24.8"/35.4"
	X/Y/Z Travel	22.0"/25.6"/27.0"
	B-Axis	0.001° Indexing
MAIN SPINDLE	Max. RPM	15,000 RPM
	Spindle Tool Shank	CAT40 BIG-PLUS
APC	APC Type	2 Pallet Rotary APC
PALLET	Pallet Size	15.7" × 15.7"
	Pallet Surface	24×5/8-11 Tapped Holes
ATC	Tool Capacity	64 Tools Disc
	Max. Tool Length/Weight	17.71"/26.4 lb.
MOTORS	Main Spindle	51 hp
MACHINE SIZE	W/D/H	90.55" x 199.41" x 108.27"
	Weight	24,200 lb

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The MA-4000H show machine will feature the following automation solutions:

Automatic Tool Changer

Automatically swap tools during machining processes
Seamless transitions between cutting, drilling, and milling tools
Consistent tool changes with pinpoint accuracy

Tower APC

Provides hours of unattended machining
Optimizes spindle utilization for increased production
Reduces labor and overhead costs
Acts as a staging and storage area for machined parts

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

Resources

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

With the highest build quality and a wide range of available specs, bed lengths, and spindle sizes, this horizontal lathe sets the bar even higher.

SHOW MACHINE SPECS

The Okuma LB3000 EX III MYW horizontal lathe at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Turning Dia./Length	Ø16.1"/19.7"
	X/Z Travel	10.2"/22.2"
MAIN SPINDLE	Max. RPM	5,000 RPM
	Spindle Nose/Chuck	A2-6/8"
	Draw Tube ID	2.60"
TURRET	Turning Turret	V12 Slotted Wedge Clamp
	O.D Tool Shank	1" Square
	Max. I.D. Tool Diameter	Ø1.5"
MOTORS	Main Spindle	30 hp/20 hp
MACHINE SIZE	W/D/H	92" x 72" x 70"
	Weight	9,680 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The Okuma LB3000 EX III MYW show machine will feature the following automation solution:

Okuma smarTwinCELL

Easy to integrate, quick to implement

Max Part Height: 9”

Max Payload: 25lb

Max Capacity: 288 parts

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

Don’t let its small footprint fool you — this horizontal lathe handles heavy, high-speed cuts for high-quality machining every time. It’s easy to operate, integrates with peripheral equipment, and comes in many configurations.

SHOW MACHINE SPECS

The Okuma LB2000 EX III MYW horizontal lathe at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Turning Dia./Length	Ø14.2"/17.7"
	X/Y/Z Travel	10.2"/4.5"/20.0"
MAIN SPINDLE	Max. RPM	5,000 RPM
	Spindle Nose/Chuck	A2-6 / 8"
	Draw Tube ID	2.60"
SUB-SPINDLE	Max. RPM	6,000 RPM
	Spindle Nose/Chuck	Flat Ø140 mm/6"
TURRET	MYW Turret	V12 Radial with Milling
	O.D. Tool Shank	0.75" Square
	Max. I.D. Tool diameter	Ø1.25"
MOTORS	Main/Sub-Spindle	30 hp/15 hp
	Turret Milling Motor	7.4 hp
MACHINE SIZE	W/D/H	112.2" x 77.13" x 88.58"
	Weight	11,550 lb.

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

The IMTS 2024 Okuma LB4000 EX III is a horizontal lathe that’s easy to operate, integrate with peripheral equipment, and configure according to unique requirements. This machine also delivers high-quality, heavy-to-high-speed cutting.

SHOW MACHINE SPECS

The Okuma LB4000 EX III horizontal lathe at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Turning Dia./ Length	Ø16.9"/28.3"
	XYZ Travel	11.8"/5.5"/33.1"
MAIN SPINDLE	Max. RPM	3,000 RPM
	Spindle Nose/Chuck	A2-11/12"
	Draw Tube ID	4.02"
SUB-SPINDLE	Max. RPM	5,000 RPM
	Spindle Nose/Chuck	A2-6/8"
TURRET	MYW Turret	V12 Radial with Milling
	O.D. Tool Shank	1" Square
	Max. I.D. Tool Diameter	Ø1.5"
MOTORS	Main/Sub-Spindle	50 hp/30 hp
	Turret Milling Motor	10 hp
MACHINE SIZE	W/D/H	141.7" x 83.4" x 91.3"
	Weight	15,620 lb.

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

The Okuma LU3000 EX is a twin turret lathe that provides process flexibility and high removal rates, all while supporting spindle stability and longevity. This machine tool also includes the latest evolution of 4-axis turning in the 8- to 10-inch chuck class.

SHOW MACHINE SPECS

The Okuma LU3000 EX horizontal lathe at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Turning Dia./Length	16.1"/23.6"
	Upper Turret Xa/Za Travel	10.2"/27.0"
	Lower Turret Xb/Zb Travel	6.3"/24.2"
MAIN SPINDLE	Max. RPM	4,200 RPM
	Spindle Nose/Chuck	A2-8/10"
	Draw Tube ID	3.19"
TURRET	Upper Turret	Slotted V12 NC Indexing
	Lower Turret	Slotted V8 NC Indexing
TOOLING	O.D. Tool Shank	1" x 1"
	Max. I.D. Tool Diameter	Ø1.50"
MOTORS	Spindle	30 hp
GANTRY	Max. Gantry Part Dia./Length	Ø2.95"/9.84"
	Max. Gantry Part Weight	33 lb.
MACHINE SIZE	W/D/H	116" x 86" x 82"
	Weight	14,740 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The LU3000 EX show machine will feature the following automation solution:

Okuma Gantry Loader

Perfect for Okuma lathes and grinders
Built-in solution for efficient part load, unload, and turnover
Servo-driven hand rotation for speed and precision

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

Bring next-generation machining to your shop with the Okuma MULTUS U3000, a multitasking lathe that shortens setups and cycle times, and easily cuts complex geometries.

SHOW MACHINE SPECS

The Okuma MULTUS U3000 multitasking lathe at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Turning Dia./Length	25.6"/59.0"
	Xa/Xb/Y/Za/Zb Travel	25.4"/9.2"/9.8"/63.0"/62.4"
	B/C Travel	240°/360°
MAIN SPINDLE	Max. RPM	4,200 RPM
	Spindle Nose/Chuck	A2-8/10"
	Draw Tube ID	3.19"
SUB-SPINDLE	Max. RPM	5,000 RPM
	Spindle/Nose Chuck	A2-6/8"
H1 TURRET	Max. RPM/Spindle Taper	12,000 RPM/CAPTO-C6
LOWER TURRET		V12 Radial with CAPTO-C5 Stations
ATC	Tool Capacity	80 Tools
	Max. Tool Length/Weight	15.7"/22 lb.
MOTORS	Main/Sub-Spindle	30 hp/30 hp
	H1 Spindle	33 hp
MACHINE SIZE	W/D/H	214" x 129" x 119"
	Weight	38,500 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The MULTUS U3000 show machine will feature the following automation solutions:

Automatic Tool Changer

Automatically swap tools during machining processes
Seamless transitions between cutting, drilling, and milling tools
Consistent tool changes with pinpoint accuracy

Okuma Robot Loader

Cuts operational and labor costs
Increases machine utilization
Is easy to integrate, quick to implement

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Is My Shop Ready for Multitasking?

Multitasking means flexibility, profitability, growth, and more potential.

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

Look no further than the Okuma GA26W for a highly efficient grinder that works expertly, accurately, and quickly to complete small parts used in automobiles, motorcycles, hydraulic equipment, and more.

SHOW MACHINE SPECS

The Okuma GA26W grinder at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Grinding Dia./Length	Ø7.9"/25.6"
	Max. Workpiece Weight	110 lb. Between Centers
	X/Z Travel	16.5"/37.4"
WHEEL SPINDLE	Max. Peripheral Speed	8,858 ft/min
	Wheel Size	Ø24" × 4.92" × Ø10"
	Wheel Angle to Z-Axis	60°
WORKHEAD	Center Hole	MT#5 Live/Dead Switchable
	Max. Spindle Speed	650 RPM
FOOTSTOCK	Center Hole	MT #5
	Quill Auto Stroke	6.7"
MOTORS	Wheel Spindle	20 hp
	Workhead Spindle	3 hp
MACHINE SIZE	W/D/H	116" x 132" x 88"
	Weight	13,860 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The GA26W show machine will feature the following automation solution:

Okuma Robot Loader:

Cuts operational and labor costs
Increases machine utilization
Is easy to integrate, quick to implement

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Helpful Technologies on Your Grinding Machine

Gap elimination and in-process gaging can help boost your grinder’s efficiency.

What Is Dressing?

And why does your grinding wheel need it? An accurate, consistent process is just the start.

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

Achieve high efficiency and productivity in 5-axis, multi-sided machining with the Okuma MU-6300V-L. This rigid, accurate vertical machining center performs consistently from the first part to the last.

SHOW MACHINE SPECS

The Okuma MU-6300V-L vertical machining center at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Machining Size	Ø32.7" × 31.3"W × 17.7"H
	X/Y/Z Travel	36.4"/41.3"/23.6"
	A/C Travel	+90° to -120° /360°
MAIN SPINDLE	Max. RPM	10,000 RPM
	Spindle Tool Shank	HSK-A100
TABLE	Table Size	Ø24.8
	Table Load Capacity	1,320 lb.
ATC	Tool Capacity	166 ATC Matrix
	Max. Tool Length/Weight	15.7"/26.4 lb.
MOTORS	Main Spindle	35 hp
MACHINE SIZE	W/D/H	191" x 118" x 139"
	Weight	38,940 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The MU-6300V-L show machine will feature the following automation solution:

Tower APC

Provides hours of unattended machining
Optimizes spindle utilization for increased production
Reduces labor and overhead costs
Acts as a staging and storage area for machined parts

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

How Much Does a 5-Axis Machine Tool Cost?

It’s a valid question — especially as more shops consider this machine tool category.

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

Versatility is the name of the game with the Okuma MULTUS B300II that combines lathe, vertical and horizontal machining center operations into one 8- to 10-in chuck class machine. It also requires fewer setups, reducing work in process.

SHOW MACHINE SPECS

The Okuma MULTUS B300II multitasking lathe at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Turning Dia./Length	24.8"/35.4"
	X/Y/Z Travel	22.8"/6.3"/36.8"
	B/C Travel	225°/360°
MAIN SPINDLE	Max. RPM	3,800 RPM
	Spindle Nose/Chuck	A2-8/10"
	Draw Tube ID	3.19"
SUB-SPINDLE	Max. RPM	5,000 RPM
	Spindle Nose/Chuck	A2-6/8"
H1 TURRET	Max. RPM	10,000 RPM
	Spindle Taper	CAPTO-C6
ATC	Tool Capacity	60 Tools
	Max. Tool Length/Weight	11.8"/17.6 lb.
MOTORS	Main/Sub-Spindle	30 hp/20 hp
	H1 Spindle	21.5 hp
MACHINE SIZE	W/D/H	171" x 89" x 102"
	Weight	22,660 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The MULTUS B300II show machine will feature the following automation solution:

Okuma Robot Loader:

Cuts operational and labor costs
Increases machine utilization
Is easy to integrate, quick to implement

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Is My Shop Ready for Multitasking?

Multitasking means flexibility, profitability, growth, and more potential.

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

This horizontal machining center is built for long runs without human intervention. With a powerful spindle and improved chip discharge performance, the Okuma MA-600HIII machines a wide range of materials with high efficiency.

SHOW MACHINE SPECS

The Okuma MA-600HIII horizontal machining center at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Machining Dia./Height	Ø41.3"/47.2"
	X/Y/Z Travel	41.3"/35.4"/39.4"
	B-Axis	0.001° Indexing
MAIN SPINDLE	Max. RPM	10,000 RPM
	Spindle Tool Shank	CAT50 BIG-PLUS
APC	APC Type	2 Pallet Rotary APC
PALLET	Pallet Size	24.8" × 24.8"
	Pallet Surface	24×5/8-11 Tapped Holes
ATC	Tool Capacity	60 Tools
	Max. Tool Length/Weight	24.8"/55 lb.
MOTORS	Main Spindle	60 hp
MACHINE SIZE	W/D/H	135" × 278" × 125"
	Weight	55,000 lb.

AUTOMATION PAIRING

Tower APC

Provides hours of unattended machining
Optimizes spindle utilization for increased production
Reduces labor and overhead costs
Acts as a staging and storage area for machined parts

Automatic Tool Changer

Automatically swap tools during machining processes
Seamless transitions between cutting, drilling, and milling tools
Consistent tool changes with pinpoint accuracy

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

Among the fastest vertical machining centers in the industry with high acceleration rates, the Okuma MB-46VEII also keeps tolerances tight and has impressive thermal stability, blending intelligence with impact.

SHOW MACHINE SPECS

The Okuma MB-46VEII vertical machining center at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	X Travel	30"
	Y Travel	18"
	Z Travel	18"
MAIN SPINDLE	Max. RPM	15,000 RPM
	Spindle Tool Shank	CAT40 BIG-PLUS
TABLE	Table Size	39" x18"
	Table Load Capacity	1,540 lb.
ATC	Tool Capacity	48 Tools
	Max. Tool Length/Weight	11.8"/17.6 lb.
MOTORS	Main Spindle	30 hp
MACHINE SIZE	W/D/H	87" x 111" x 108"
	Weight	16,500 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The MB-46VEII show machine will feature the following automation solution:

Okuma Mobile Robot

Equipped with customizable programming, speed, and safety settings
Perfect for environments where operators and robots interact
Have intelligent features for insights into smart manufacturing

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

The GENOS M560-V is our number one machining center for a reason. Whether it cuts aluminum or titanium, it delivers high-precision machining each time thanks to its 32-tool magazine and rigid bridge-style construction.

SHOW MACHINE SPECS

The Okuma GENOS M560-V vertical 3-axis machining center at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	X Travel	41.3"
	Y Travel	22"
	Z Travel	18"
MAIN SPINDLE	Max. RPM	15,000 RPM
	Spindle Tool Shank	CAT40 BIG-PLUS
TABLE	Table Size	51" x 22"
	Table Load Capacity	1,980 lb.
ATC	Tool Capacity	32 Tools
	Max. Tool Length/Weight	11.8"/ 17.6 lb.
MOTORS	Main Spindle	30 hp
MACHINE SIZE	W/D/H	101" x 126" x 108"
	Weight	18,260 lb.

RESOURCES

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

The GENOS M560V-5AX doesn’t just meet expectations. It changes them with power, performance, and extreme part accuracy. And this 5-axis vertical machining center is part of our Affordable Excellence line.

SHOW MACHINE SPECS

The Okuma GENOS M560V-5AX 5-axis machining center at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Machining Dia./Height	Ø27.6"/19.7"
	X/Y/Z Travel	41.3"/22"/18"
	A/C Travel	+20° to -110°/360°
MAIN SPINDLE	Max. RPM	15,000 RPM
	Spindle Tool Shank	CAT40 BIG-PLUS
TABLE	Table Size	Ø19.7
	Table Load Capacity	880 lb.
ATC	Tool Capacity	60 Tools
	Max. Tool Length/Weight	11.8"/17.6 lb.
MOTORS	Main Spindle	30 hp
MACHINE SIZE	W/D/H	99" x 148" x 120"
	Weight	22,660 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The GENOS M560V-5AX show machine will feature the following automation solutions:

Okuma Robot Loader

Cuts operational and labor costs
Increases machine utilization
Is easy to integrate, quick to implement

Automatic Tool Changer

Automatically swap tools during machining processes
Seamless transitions between cutting, drilling, and milling tools
Consistent tool changes with pinpoint accuracy

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

RESOURCES

How Much Does a 5-Axis Machine Cost?

Understand the value, impact, and pricing of 5-axis machine tools.

The Hidden Costs of Inferiority

Our Affordable Excellence line makes high-quality machining available to all shops.

Contact Distributor

Thank you for contacting Okuma! A representative will be in touch with you shortly.

By providing a telephone number and submitting this form, you consent to SMS text messages from Okuma.
Message & data rates may apply. Reply STOP to opt out.

Contact Distributor

QUICK FACTS

*EXCLUSIVE CONTENT*

With a high-speed, high-power motor, a large work envelope, and 5-axis technology, the Okuma MU-4000V delivers a wide range of high-quality workpieces efficiently.

SHOW MACHINE SPECS

The Okuma MU-4000V 5-axis machining center at IMTS 2024 features the following specifications, options, and accessories:

CAPACITY/TRAVEL	Max. Machining Dia./Height	Ø15.7"/8.7" [Erowa]
	X/Y/Z Travel	29"/18"/18"
	B/C Travel	+90° to -120°/360°
MAIN SPINDLE	Max. RPM	15,000 RPM
	Spindle Tool Shank	CAT40 BIG-PLUS
APC	APC Type	Erowa ERC80
	Number of Pallets	6 [Erowa]
PALLET	Pallet Size	11.8" x 11.8" [Erowa]
	Pallet Load Capacity	176 lb. [Erowa]
ATC	Tool Capacity	166 Tool Matrix Magazine
	Max. Tool Length/Weight	11.8"/17.6 lb.
MOTORS	Main Spindle	30 hp
MACHINE SIZE	W/D/H	95" x 128" x 116"
	Weight	21,340 lb.

AUTOMATION PAIRING

As part of Okuma Factory Automation, our team will highlight some of the most exciting automation offerings to be shown at IMTS 2024. The MU-4000V show machine will feature the following automation solution:

EROWA ERC80

Can move up pallet sizes for varying workpiece sizes
Large pallets up to 80kg in weight transferred with precision
Extendable magazine levels enable comfortable loading and unloading process

PARTNER TECHNOLOGIES

Committed to moving manufacturing forward, our partners’ specialized products and expertise provide customers with solutions that solve their toughest manufacturing challenges. On this machine, you can find the following partner solutions:

THE END OF IMTS 2024

Can Be the Start of Something New

IMTS 2024

McCormick Place September 9-14, 2024 Chicago, IL BOOTH #338500

MA-4000H

LB3000 EX III

LB2000 EX III MYW

LB4000 EX III MYW

LU3000 EX

MULTUS U3000

GA26W

MU-6300V-L

MULTUS B300II

MA-600HIII

MB-46VEII

GENOS M560-V

GENOS M560V-5AX

MU-4000V

CNC Automation

WHAT TO EXPECT

OSP-P500 CNC Control

Open Possibilities

OSP-P500 CNC Control

Automation for All

World-Class Service & Support

Training & Education

Our Trusted, Local Distributors

Our Partners Make Us Who We Are

Contact Okuma

MA-4000H

Automatic Pallet Changer

QUICK FACTS

SHOW MACHINE SPECS

CAPACITY/TRAVEL

MAIN SPINDLE

APC

PALLET

ATC

MOTORS

MACHINE SIZE

AUTOMATION PAIRING

Automatic Tool Changer

Tower APC

PARTNER TECHNOLOGIES

Resources

Product Brochure

Contact Distributor

LB3000 EX III

smarTwinCELL

QUICK FACTS

SHOW MACHINE SPECS

CAPACITY/TRAVEL

MAIN SPINDLE

TURRET

MOTORS

MACHINE SIZE

AUTOMATION PAIRING

PARTNER TECHNOLOGIES

RESOURCES

Product Brochure

LB3000 EX III at EMO 2023

LB3000 EX III Product Video

The New LB3000 EX III

Contact Distributor

LB2000 EX III MYW

QUICK FACTS

SHOW MACHINE SPECS

CAPACITY/TRAVEL

MAIN SPINDLE

SUB-SPINDLE

TURRET

MOTORS

MACHINE SIZE

PARTNER TECHNOLOGIES

RESOURCES

Product Brochure

Preventive Maintenance

Contact Distributor

LB4000 EX III MYW

QUICK FACTS